Rigger course Module P-2.4 & P-4.4 English
The course provides insight into the principles behind the rigging equipment’s construction, operation, use and maintenance. The purpose is to avoid unwanted incidents in connection with rigging operations.
The rigging course is for personnel who use or assemble lifting equipment and manual winches and hoists. Equipment used for horizontal and vertical movement of loads, and which is suspended in an uncertified structure (beam/padeye). The course will also be useful for personnel involved in lifting operations on land.
The learning initiative must have a duration of at least 40 teaching hours, and must be distributed over a minimum of 5 days. In this context, a teaching hour means 45 minutes of teaching. A prerequisite for this training module is that P-2.4 and P-4.4 are taken consecutively.
40 hours, with the following time distribution:
|Theoretical final exam||2 hours|
|Practical test for group 1, evaluated by group 2||3 hours|
|Practical test for group 2, evaluated by group 1||3 hours|
Module O-1.1 G11 Lifting equipment (alternatively module 1 + 2.3).
Fall protection basic ref NS 9610/ NOROG guideline 113
All pre-requisites must be documented by the participant in the form of a certificate of competence at the start, and must be approved by the training organization, before the learning initiative starts.
Course certificates are issued